^^ 2011/04/05 21:01
안녕하세요! 청각학을 공부하는 학생입니다~

공부하는 도중에 정말 그냥 궁금한게 생겨 여기에 여쭤봅니다!

Interaural Attenuation;IA 값이 왜 헤드폰과 인설트폰에 따라 차이가 나는 것인지..

어떻게 해서 IA값들이 헤드폰과 인설트폰으로 딱 나눠지는지 궁금합니다!


안녕하세요?

청능사(audiologist) 김형재입니다.

 

이렇게 흥미로운 질문을 주신 걸 보니 청각학에 많은 관심을 가지고 공부하시는 학생으로 생각이 됩니다. 앞으로 청각학의 발전에 많은 기여를 하시게 되리라 기대해봅니다.

그리고 주신 질문 덕분에 최신 자료로 다시 한번 IA 개념을 정리할 수 있어서 개인적으로도 도움이 되었습니다.

 

일반적으로 말하는 IA(Interaural Attenuation)값은 헤드폰의 경우 40dB HL, 인서트폰의 경우 50~60dB HL입니다. , 다시 풀어서 생각해보면 헤드폰의 경우 감소되는 에너지의 양이 40dB HL이고(아래 그림 참조) 인서트폰은 50~60dB HL이므로, 인서트폰을 사용하면 반대 측 귀로 전달되는 과정에서 더 많은 에너지의 감소가 나타난다는 것입니다.


                                                   <이미지 출처 : 위키피디아>

아래 그림과 같이 두개골의 진동으로 소리를 전달하는 Bone Vibrator의 경우 IA값이 0dB HL입니다. 이는 감소되는 에너지가 없이 그대로 전달된다는 것을 의미합니다.

 

                                                 <이미지 출처 : 위키피디아>

헤드폰과 인서트폰의 양이감쇠 비교를 위해 각각의 착용 모습을 비교해 보면 헤드폰은 머리띠(head band)가 두개골을 조이고, 수화기 진동면이 인서트폰 보다 넓어 두개골 진동을 더 많이 유발합니다. 반면 인서트폰은 귀꽂이(ear tip)를 통해 외이도 안쪽으로 위치하여 두개골과의 접촉면이 매우 작습니다.

따라서,
헤드폰으로 소리자극이 제시될 경우에는 두개골을 통해 더 많은 진동이 전달되므로 되어 반대측 귀에 소리가 전달되는 양이 다소 많아집니다. 그에 반해 접촉면이 넓지 않은 인서트폰의 경우 두개골의 진동이 적고 상대적으로 소실되는 에너지가 많아지게 됩니다.

 

, 헤드폰과 인서트폰에 따라 IA값이 차이 나는 것은 두개골이 진동되는 정도가 다르기 때문입니다.

 

※ 참고 : Cross hearing and interaural attenuation

When sound is applied to one ear the contralateral cochlea can also be stimulated to varying degrees, via vibrations through the bone of the skull. When the stimuli presented to the test ear stimulates the cochlea of the non-test ear, this is known as cross hearing. Whenever it is suspected that cross hearing has occurred it is best to use masking. This is done by temporarily elevating the threshold of the non-test ear, by presenting a masking noise at a predetermined level. This prevents the non-test ear from detecting the test signal presented to the test ear. The threshold of the test ear is measured at the same time as presenting the masking noise to the non-test ear. Thus, thresholds obtained when masking has been applied, provide an accurate representation of the true hearing threshold level of the test ear[2][6].

 

A reduction or loss of energy occurs with cross hearing, which is referred to as interaural attenuation (IA) or transcranial transmission loss[6]. IA varies with transducer type. It varies from 40 dB to 80 dB with supra-aural headphones. However, with insert earphones it is in the region of 55 dB[2]. The use of insert earphones reduces the need for masking, due to the greater IA which occurs when they are used (See Figure 1)[7].

 

Air conduction results in isolation, give little information regarding the type of hearing loss. When the thresholds obtained via air conduction are examined alongside those achieved with bone conduction, the configuration of the hearing loss can be determined. However, with bone conduction (performed by placing a vibrator on the mastoid bone behind the ear), both cochleas are stimulated. IA for bone conduction ranges from 0-20 dB (See Figure 2).Therefore, conventional audiometry is ear specific, with regards to both air and bone conduction audiometry, when masking is applied[2].

                                                                                                <출처 : 위키피디아>


 

감사합니다.

 


 

+ Recent posts